ANYWHITE -
sleek, white and fully customized

ANYWHITE is a timeless door where both the door panel and the minimalist BKO block frame are finished in the color 'Snow White' (RAL9016).

Unlike the personalized range of ANYWAYdoors, for ANYWHITE the aluminum profiles are powder coated instead of an anodized finish. This makes the white finish technically possible.

The minimalist recessed handle 'IBHG VXS' completes the sleek design of this door. Optionally, a sliding lock can be provided.

Always made to measure: up to 1100 mm wide and 3050 mm high

The door leaf is a flat, tight and stable sandwich panel with a total thickness of 50 mm. The aluminum base frame acts as a frame and protects the edges against side impact and penetrating or rising moisture.

The base frame receives an 'eco friendly' filling of 42 mm EPS regenerate, which optimizes the thermal and acoustic sealing of the door. The visual finish (3 mm Resopal Massiv) is glued to the base frame on both sides.

The finish of the door panel in the color 'Snow White' with fine pearl (60) structure is insensitive to dirt and fingerprints.

Resopal Massiv is an extremely stable, moisture-repellent and antibacterial material that is also resistant to stains, heat and impacts thanks to its protective top layer. This composition offers a low-paint, colorfast, scratch-resistant and easy-care interior door.

Technically, every door can open 90° in both directions (2-way). The direction of rotation can be changed from 2-way to 1-way 90° where desired using the patented locking technology.

The direction of rotation (1-way or 2-way) and hinge side can be adjusted at any time in the frame, making the doors extremely flexible and therefore ANYWAY.

Patented locking technology allows the door to open silently in both directions, where it can be easily blocked to one pivot side if desired.

The male (convex) part consists of a plastic profile on the door leaf; the female (concave) part is integrated into the door frame.

This locking technology works without a traditional latch or magnetic lock, allowing the door to be used smoothly and hands-free.

Due to the unique closing technology, the gaps between the door leaf and the frame are eliminated in the best possible way.

The door is equipped with a draught excluder at the bottom to optimize thermal and acoustic performance. Perforated closing profiles are used to provide the required flow opening. The air can thus reach the other room via these perforations through the door panel. In this way the advantage of a draught excluder is maintained.

The available throughput depends on the available width.

The ventilation profile with draught excluder is easily removable and can thus be removed if necessary. After removal, you have 11 mm of free space under the door.

By using pivot hinges and a special rounded profile on the back of the door panel, it is virtually impossible to crush your finger on the hinge side of the door.