Steel look doors -
fully customised

Technically, every door can open 90° in both directions (2-way). The direction of rotation can be changed from 2-way to 1-way 90° where desired using the patented locking technology.

The direction of rotation (1-way or 2-way) and hinge side can be adjusted at any time in the frame, making the doors extremely flexible and therefore ANYWAY.

Swing doors

The "standard" hinges are designed for door leaves up to 1100 mm wide. The hinges are fixed laterally in the door frame and have no floor fixing. The hinges are completely 'invisibly' integrated into the door leaf and the technology remains hidden even when the door is open (in contrast to classic 'invisible hinges').

Pivot doors

These compact pivot hinges are completely integrated into the door panel. They are equipped with a high-tech comfort lock that also keeps the door open at 90°.

During development, a great deal of attention was paid to mounting, so that these doors can be used in both new construction and renovation. The pivot hinge is fixed on top of the finished floor with two 45 mm screws and dowels.

All of our steel look doors are made from anodized aluminum. This lightweight, sleek and low-maintenance material is combined with a wide range of tempered glass.

Anodizing is an electrochemical process in which the metal surface is transformed into a decorative, durable and corrosion-resistant finish.

The finish is not applied to the surface like paint or powder coatings, but is fully integrated with the underlying aluminum, preventing it from flaking off.

Anodized aluminum is considered environmentally friendly because it has little or no harmful effects on land, air or water.

Patented locking technology allows the door to open silently in both directions, where it can be easily blocked to one pivot side if desired.

The male (convex) part consists of a plastic profile on the door leaf; the female (concave) part is integrated into the door frame.

This locking technology works without a traditional latch or magnetic lock, allowing the door to be used smoothly and hands-free.

Due to the unique closing technology, the gaps between the door leaf and the frame are eliminated in the best possible way.

The door is equipped with a draught excluder at the bottom to optimize thermal and acoustic performance. Perforated closing profiles are used to provide the required flow opening. The air can thus reach the other room via these perforations through the door panel. In this way the advantage of a draught excluder is maintained.

The available throughput depends on the available width.

The ventilation profile with draught excluder is easily removable and can thus be removed if necessary. After removal, you have 11 mm of free space under the door.

By using pivot hinges and a special rounded profile on the back of the door panel, it is virtually impossible to crush your finger on the hinge side of the door.

Applicable to 'Swing' doors only!